KODE.1, THE VERSATILE KNOB.

To fit out a store, different materials can be used: wood, glass, metal and plaster board. To position fittings all you

need is one knob: kode.1.

Kode.1 can be used on all materials and lets you to hook every accessories: hooks, brackets and blisters, with a

pleasant and essential graphical effect.

Kode.1 is made in steel with a satin finish and can be applied on any single or double-sided surface depending on the

requirement of the designer.

So, when you have a design or would like to furnish a store think of kode.1, the one thing that makes everything easier.
It’s the real and only “kode” you will need to furnish and design interiors.
 

KODE.1, TECHNICAL CHARACTERISTICS
The kode.1 connecting system has small dimensions, 25 x 25 mm and on panel,
unused and used knobs show a perfectly smooth surface without holes or grooves,
the system has the following characteristics:

> The possibility to fix knobs in front and back depending where the bolting panel

is found or on an already mounted exterior where access from the back is not possible.

> It’s possible to fasten these knobs on glass plates or Plexiglas so that the back fixture doesn’t push out the front molding.

> The pureness of the materials used such

as satin finished stainless steel, which will remain unaltered in time and against any type of varnishing.

> It’s possible to mount the knobs against one

another on the exact side of the glass plate
(as well as other materials) making any surface

double-sided.

> Along with these knobs, bars that use the same type of fittings are being produced which can be used to create graphic

motifs on panels providing a distinguished effect. Like the knobs, the bars can be

mounted against a backing or against one another, making the panels double-sided.

KODE.2 The knob set for wall kode.2, like kode.1, provides the possibility of including

connecting systems for brackets, hook racks and other sturdy accessories.

The hooking bush can be assembled on any kind of wood, metachrylates or steel panels

in order to provide high resistance under load.

All the fittings are being produced in squared satin finished

stainless steel tubes of 20x20 section. The extreme simplicity of

assembling every accessories on the connecting

system allows an easy adjustment of changing

of goods position in the store.